AD-584-30 ADAPTER

Part #: 190-8430

Request 3D Model

Electrode Angle Adapters are used to improve the holder life and flexibility by allowing users to select different angles for tooling setups. The adapter can also be replaced when the taper wears out.

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

The overall length is 2.000 IN
The part width is 1.000 IN
The part mounts via 5/8 - 14 NPT threads.
The part holds a subcomponent via a 4RW standard taper which is suitable for weld forces ranging between 200 to 800 pounds of force.
The body length is 1.250 IN
The offset is 1.500 IN
The engagement angle is 30 Degrees

Specifications

RWMA Material Type	RWMA Class 2
Pipe Thread or Taper	5/8 - 14 NPT
Taper Socket	4RW
Overall Length	2.00000
Offset	1.5000
Body Length	1.2500
Width of Body	1.00000
Unit of Measure	IN
Angle of Engagement (deg)	30.0
Tube	Yes