AD-54-90 ADAPTER

Part #: 190-9549

Request 3D Model

Electrode Angle Adapters are used to improve the holder life and flexibility by allowing users to select different angles for tooling setups. The adapter can also be replaced when the taper wears out.

RMWA Class 2 material is high conductivity and high strength alloy recommended for structural, current carrying secondary components and electrode holders. This is a heat treatable alloy used in the fully heat treated condition.

The overall length is 2.000 IN
The part width is 1.000 IN
The part mounts via a 5RW standard taper which is suitable for weld forces ranging between 800 to 1500 pounds of force.
The part holds a subcomponent via a 4RW standard taper which is suitable for weld forces ranging between 200 to 800 pounds of force.
The body length is 1.125 IN
The offset is 1.250 IN
The engagement angle is 90 Degrees

Specifications

RWMA Material Type	RWMA Class 2
Pipe Thread or Taper	5RW
Taper Socket	4RW
Overall Length	2.00000
Offset	1.2500
Body Length	1.1250
Width of Body	1.00000
Unit of Measure	IN
Angle of Engagement (deg)	90.0
Tube	Yes